Location: 04 Masonry
A brick arched wall niche. Duh. Right now it can only do a semicircular arch. It will draw the brick lines on the sides and around the arch. The sill is optional.
In plan, the niche will display correctly. If using the Reflected Ceiling Plan display option, the niche will disappear completely, as if if it was a regular window. Consider using a patch.
Location: 12 Furnishings/Casework
• Obviously, set the number of shelves and the number of vertical divisions. You can also set a maximum height for the shelves and have the quantity calculated. The height of the bottom shelf can be set independently, or not.
• For odd values of horizontal divisions, the width of the center shelves can be set independently.
• There are separate thicknesses for the box, base, shelf, and vertical divider.
• You can choose to start with a shelf or a space (eg, to place on top of a counter).
• For shelves which will be cased like a door, you have the option of using door dimensions for easier alignment.
• All the trim options of a typical door are available, and should behave consistently.
• You can place a 'transom' section on top, which can be divided separately.
• In plan, you can choose a simple rectangle or 'poche' mode, which shows the cut profile of the shelf, including the vertical dividers.
That's all I can think of.
Note: This object is pretty OK, if a bit glitchy, but I'm really enjoying the Cabinet Opening in thick wall method for bookshelves.
