All the common layouts (that we can think of) are blocked up in the project templates. These guidelines apply no matter when a layout is first needed.
Searched for "plan"
25 Results
All the typical layouts (that I can think of) are blocked up in the project templates. Developing the layouts consists mostly of framing the plan, tuning up the section/elevations, and arranging the drawings on the sheets.
When dimensioning, strive for stunning, perfect, complete, beautiful clarity. I'm serious.
• What Shows. Full height walls. Counters, appliances, and plumbing fixtures. Stairs, decks, driveways, floor finish fills. Stair and deck railings. Most roofs. Overhead elements including beams, ceiling lines, and roof overhangs. Room names, preferably in the form of zone stamps. Dimensions. Centerline markers. Names of cabinetry elements ('Bench'). Floor elevations. Markers for sections, elevations, interior elevations, plan enlargements,
Intersection priorities help the user control interactions between certain elements. Wall and beam elements have their own intersection priority; I'm calling that the element priority. Composite skins (and components of custom profiles) have their own intersection priorities. Those are skin priorities. Neither of these should be confused with the intersection group number property of layers, though that bears on intersections
The user has requirements. The software has capabilities. Where the capabilities end and the requirements keep going is a limit. To get beyond the limit requires workarounds. Some limits are harder than others and all we can do is wish (beg) them removed. Here's a rich example concerning structural posts (columns) in residential construction. These are things like 4x4s, multiple
Location: 01 General / Drawing Tools System requirements: Accessories add-on in Add-ons folder An accessory as a special object that can be associated with another element. When you edit the element, the accessories edit themselves to keep up. This kind of automatic geometry is rare in Archicad, and welcome. Yet the accessories live in the limbo of semi-features known as
Most of the advice about sections and elevations applies to interior elevations as well. We do interior elevations because the larger scale lets us show more information. Some of this information is already in the model and the scale change reveals it. Some of it is fine modeling that doesn't need to be done until you start the interiors.
Location: 13 Special Construction A big dull block for subtracting a rectangular hole into a ceiling slab. Why not use a slab for an operator? Why not just draw a conventional hole in the slab? Because while the 3D block is dull, the plan symbol is rather clever, responding intelligently to the new ceiling switch in Model View Options. To
In Model View Options Location: 01 General / 2 Drawing Tools Among the least heralded new features of Archicad 11, tucked into the bottom of the Model View Options dialog, is the modestly named 'Story Viewpoint Type'. Not heralded at all, in fact; there's no mention of it in the New Features Guide. I understand why they don't want
Location: 13 Special Construction All of Swoop JAM9a still in effect. Added: -- Optional Cover fill and all related parameters. You can allow the slope of the object to Distort the fill. No, the distortion doesn't vary as the slope changes. You can move the fill's origin using a hotspot; you have to select the object to see it.
• What Shows. Roofs on the A Roof2 layers. Gutters (on F Gutter). Top elements of chimneys on A Fireplace or A Roof2. Notes on +A Arch Note Reg Scale. +A Misc Line. The roof plan uses the same layer combination for output as the rest of the plans, A1 Floor+Roof Plan. Roof elements will be placed on the
About 60-80% of this post is missing. This is a complicated topic. No, it's not a complicated topic, it leads to complicated topics. If I can decide how to limit the discussion, it isn't complicated at all. This is the dilemma with a lot of powerful AC features. I'd like you to grasp the whole puzzling, quirky thing, but I'd
Two parameters added to the 'Plan' options in the Interior JAM9 door, so you can turn off either side of a cased opening. The parameters are 'Cased Op Line (Swing)' and 'Cased Op Line (Opp)'. Both are on by default. (Note: You will only see them in the parameter list, not the interface pages.) This feature address this condition, where
Background: Navigator Theory Issue: You need plumbing (or mechanical, etc) plans, which aren't set up in the templates. This is a piece of cake.
Location: 01 General / 1 Graphic Symbols A custom drawing title object for plans only. It's very similar to the old Drawing Title RND 9a. As you know, in AC10 we use the new automatic drawing title marker objects. All drawings except full size plans should use the automatic titles. Why do plans still use an object? Because we want
The integrated layout book in AC10 makes it even easier to start layouts in advance, in the templates, and have them nearly 'just work'. All the common layouts (that I can think of) are blocked up in the project templates. Developing the layouts consists mostly of framing the plan, tuning up the section/elevations, and arranging the drawings on the sheets.
Everything in the general framing plan discussion also applies to roof framing plans. There's a few special considerations: • The roof framing plan should usually be generated from the top occupied story, not the roof story. For most projects, this is either the attic or the second floor. In the past, we have used the roof story, but not
Rules for framing plans. Foundation plans are slightly different. Roof framing plans are very similar. I'll have a separate note for them. I wonder what the difference between 'slightly different' and 'very similar' is. • Walls. Display of walls is controlled by Display Options. The 'Cut Fills' option should be set to 'Separators Only'. The walls will be clear,
In framing plans, it's often helpful to show the walls on stories below with dashed lines. Especially roof framing. Well how do you do that.